Installing a Brick Paver Walkway or Cheapest Brick

The usage of Bricks or Pavers to create a walkway or patio area complements a home in a method that is unequaled. In addition, setting up a Brick or Paver walkway does not necessarily require a pro.

The secret to installing a Brick or Paver Walkway is to first correctly prepare the area where the bricks/pavers are to be set up. In addition, string lines must be strung on each side of the sidewalk.
When the area has been dug down, 3/4" gravel stone should be laid in and tamped down tightly. Then 2" of sand, or stone dust ought to be topped the gravel. Again the sand/stone dust should be tamped down. Stone dust is preferred. The height in between the tamped down sand and the stringline must equal the thickness of the brick or paver.

Now that you have a stable base, place a 1" pipeline or ledger board the length of the walkway on either side of the sidewalk. Then using a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will develop a level area to lay the bricks/pavers.

Now place on the level sand/stone dust strips of plastic brick borders. Set up a run on both sides of the prepared area. These strips will act as your sidewalk border and help to keep the integrity and shape of the pathway.

You can then start to lay the bricks/pavers as soon as this is done. There are numerous patterns you can lay. I especially like the Herring Bone pattern. The key to laying the bricks/pavers is to guarantee that they interlock with each other. Constantly stagger adjacent rows of bricks by 1/2 of a brick to interlock them. This will again assist keep the stability of the walkway.

When constructing the pathway, inevitably bricks/pavers will need to be cut or split. Unless you want to buy or rent a costly wetsaw, I would suggest purchasing a basic brick/paver splitter. It is generally a sculpt with a wide end that is the width of the bricks/pavers. To in fact cut/split the brick/paver, lay it in a bed of sand and place the chisel at a 75 degree angle over the area where you wish to break the brick. Using a hammer strike the butt end of the chisel securely. You might need to do this a number of times. You may also desire to flip the brick/paver over and strike the other side of the brick utilizing the hammer and chisle. Within one or 2 strikes the brick/paver ought to break cleanly. , if your pathway has curves you will require to buy/rent a wetsaw.

.

After setting up the bricks, develop the outdoors edges with additional sand, and after that shovel in the topsoil and pack down securely.
Finally, spread stone dust over the new pathway and sweep into the fractures. Repeat this procedure more info a couple of times to guarantee the cracks are totally filled. This will complete the interlocking of the bricks and assist to get rid of any weed development. Simply add grass seed to the outside edges and you must have a lovely entrance to your house within a couple of weeks.


In addition, setting up a Brick or Paver sidewalk does not always require a pro. The key to setting up a Brick or Paver Walkway is to very first correctly prepare the area where the bricks/pavers are to be set up. Now that you have a stable base, put a 1" pipeline or journal board the length of the walkway on either side of the pathway. These strips will act as your sidewalk border and aid to maintain the integrity and shape of the sidewalk. Undoubtedly bricks/pavers will require click here to be cut or split when constructing the pathway.

Leave a Reply

Your email address will not be published. Required fields are marked *